How to Measure HCG Drops

Gunnar February 11, 2015 No Comments


8 Steps to Load the HCG Drops into the Syringe.


Step 1:

Remove blue cap that covers the tip.

Step 2:

Make sure plunger is pushed to the bottom of the syringe’s barrel.

Step 3:

Place syringe into the open bottle of HCG so the tip is touching the bottom of the HCG bottle.

Step 4:

Pull plunger up so that the HCG diet drops fills the syringe barrel.

Step 5:

Keep syringe tip over the mouth of the open HCG bottle and push the plunger down the barrel. This will release the excess HCG liquid from the syringe back into the HCG bottle.

Step 6:

Push the plunger down. The entire black stopper of the plunger should be below the .38ml line mark on the syringe. Extracting the right amount of HCG diet drops with every dose.

Step 7:

Place the tip of the syringe under your tongue and push the plunger all the way down making sure all the HCG diet drops are dispersed under your tongue. Hold for at least 15 seconds then swallow.

Step 8:

Clean syringe. Rinse with room temperature water.



Web Site

Leave a Reply